Rigid truck 7.50 (3 axles) internal dimensions
Rigid truck 7.50 (3 axles): internal size 7,500 × 2,450 × 2,600 mm, internal volume 47.8 m³, maximum payload 15,000 kg. Its floor takes 18 Euro pallets or 14 industrial pallets in a single layer.
- Length
- 7,500 mm
- Width
- 2,450 mm
- Height
- 2,600 mm
- Volume
- 47.8 m³
- Floor area
- 18.4 m²
- Max payload
- 15,000 kg
- Loading metres
- 7.5 LDM
Dimension drawing
What fits
- Euro pallets · 1200 × 800
- 18
- Industrial pallets · 1200 × 1000
- 14
- Cartons · 600 × 400 × 400
- 478
Three-axle rigid truck. For mid-size part loads and city deliveries.
The engine's layout
How it was calculated
Pallet and carton counts were calculated with the StowCargo packing engine: pallets in a single layer on the floor (not stacked), cartons in any orientation and weightless (dimensions only). No gap is left between pallets; in practice one row may be planned less to allow for forklift and securing clearance. Internal dimensions are typical values and can differ by a few centimetres between manufacturers and vehicles.
Calculated on 2026-10-27
Compare with similar vehicles
| Vehicle | Internal size (mm) | Volume | Euro pallets | Cartons |
|---|---|---|---|---|
| Rigid truck 7.50 (3 axles) | 7,500 × 2,450 × 2,600 | 47.8 m³ | 18 | 478 |
| Curtainsider 13.60 | 13,600 × 2,480 × 2,700 | 91.1 m³ difference: (+43.3 m³) | 34 difference: (+16) | 884 difference: (+406) |
| Mega trailer | 13,600 × 2,480 × 3,000 | 101.2 m³ difference: (+53.4 m³) | 34 difference: (+16) | 1,020 difference: (+542) |
| Reefer trailer | 13,300 × 2,460 × 2,600 | 85.1 m³ difference: (+37.3 m³) | 33 difference: (+15) | 858 difference: (+380) |
| Flatbed trailer | 13,600 × 2,480 × 2,650 | 89.4 m³ difference: (+41.6 m³) | 34 difference: (+16) | 884 difference: (+406) |
| Rigid truck 9.60 (4 axles) | 9,600 × 2,450 × 2,700 | 63.5 m³ difference: (+15.7 m³) | 24 difference: (+6) | 624 difference: (+146) |
| Light truck | 4,300 × 2,100 × 2,200 | 19.9 m³ difference: (−27.9 m³) | 8 difference: (−10) | 190 difference: (−288) |
| Panel van (long) | 3,500 × 1,750 × 1,800 | 11.0 m³ difference: (−36.8 m³) | 5 difference: (−13) | 100 difference: (−378) |
Frequently asked questions
What are the internal dimensions of a Rigid truck 7.50 (3 axles)?
Internal length 7,500 mm, width 2,450 mm, height 2,600 mm. Internal volume 47.8 m³, floor area 18.4 m².
How many Euro pallets fit in a Rigid truck 7.50 (3 axles)?
18 Euro pallets (1200 × 800 mm) or 14 industrial pallets (1200 × 1000 mm) fit in a single layer on the floor. The calculation leaves no gap between pallets.
What is the maximum payload of a Rigid truck 7.50 (3 axles)?
Typical maximum payload is 15,000 kg. With the floor full of 18 Euro pallets, that is at most about 830 kg per pallet on average.
How many loading metres (LDM) is a Rigid truck 7.50 (3 axles)?
Its internal length is 7,500 mm, so the floor is 7.5 LDM. A Euro pallet takes 0.4 LDM and an industrial pallet 0.5 LDM; the 18 Euro pallets on the floor come to 7.2 LDM.
How many cartons fit in a Rigid truck 7.50 (3 axles)?
478 standard 600 × 400 × 400 mm cartons fit, a volume utilisation of 96.1%. With heavy cartons the limit is the payload rather than the volume.
Plan your load in this vehicle.
Paste your packing list; the engine places it in the Rigid truck 7.50 (3 axles) and calculates axle loads and the loading sequence.