Rigid truck 9.60 (4 axles) internal dimensions
Rigid truck 9.60 (4 axles): internal size 9,600 × 2,450 × 2,700 mm, internal volume 63.5 m³, maximum payload 18,000 kg. Its floor takes 24 Euro pallets or 18 industrial pallets in a single layer.
- Length
- 9,600 mm
- Width
- 2,450 mm
- Height
- 2,700 mm
- Volume
- 63.5 m³
- Floor area
- 23.5 m²
- Max payload
- 18,000 kg
- Loading metres
- 9.6 LDM
Dimension drawing
What fits
- Euro pallets · 1200 × 800
- 24
- Industrial pallets · 1200 × 1000
- 18
- Cartons · 600 × 400 × 400
- 624
Four-axle rigid truck. Shorter than a semi-trailer but takes heavy loads for urban and regional distribution.
The engine's layout
How it was calculated
Pallet and carton counts were calculated with the StowCargo packing engine: pallets in a single layer on the floor (not stacked), cartons in any orientation and weightless (dimensions only). No gap is left between pallets; in practice one row may be planned less to allow for forklift and securing clearance. Internal dimensions are typical values and can differ by a few centimetres between manufacturers and vehicles.
Calculated on 2026-10-27
Compare with similar vehicles
| Vehicle | Internal size (mm) | Volume | Euro pallets | Cartons |
|---|---|---|---|---|
| Rigid truck 9.60 (4 axles) | 9,600 × 2,450 × 2,700 | 63.5 m³ | 24 | 624 |
| Curtainsider 13.60 | 13,600 × 2,480 × 2,700 | 91.1 m³ difference: (+27.6 m³) | 34 difference: (+10) | 884 difference: (+260) |
| Mega trailer | 13,600 × 2,480 × 3,000 | 101.2 m³ difference: (+37.7 m³) | 34 difference: (+10) | 1,020 difference: (+396) |
| Reefer trailer | 13,300 × 2,460 × 2,600 | 85.1 m³ difference: (+21.6 m³) | 33 difference: (+9) | 858 difference: (+234) |
| Flatbed trailer | 13,600 × 2,480 × 2,650 | 89.4 m³ difference: (+25.9 m³) | 34 difference: (+10) | 884 difference: (+260) |
| Rigid truck 7.50 (3 axles) | 7,500 × 2,450 × 2,600 | 47.8 m³ difference: (−15.7 m³) | 18 difference: (−6) | 478 difference: (−146) |
| Light truck | 4,300 × 2,100 × 2,200 | 19.9 m³ difference: (−43.6 m³) | 8 difference: (−16) | 190 difference: (−434) |
| Panel van (long) | 3,500 × 1,750 × 1,800 | 11.0 m³ difference: (−52.5 m³) | 5 difference: (−19) | 100 difference: (−524) |
Frequently asked questions
What are the internal dimensions of a Rigid truck 9.60 (4 axles)?
Internal length 9,600 mm, width 2,450 mm, height 2,700 mm. Internal volume 63.5 m³, floor area 23.5 m².
How many Euro pallets fit in a Rigid truck 9.60 (4 axles)?
24 Euro pallets (1200 × 800 mm) or 18 industrial pallets (1200 × 1000 mm) fit in a single layer on the floor. The calculation leaves no gap between pallets.
What is the maximum payload of a Rigid truck 9.60 (4 axles)?
Typical maximum payload is 18,000 kg. With the floor full of 24 Euro pallets, that is at most about 750 kg per pallet on average.
How many loading metres (LDM) is a Rigid truck 9.60 (4 axles)?
Its internal length is 9,600 mm, so the floor is 9.6 LDM. A Euro pallet takes 0.4 LDM and an industrial pallet 0.5 LDM; the 24 Euro pallets on the floor come to 9.6 LDM.
How many cartons fit in a Rigid truck 9.60 (4 axles)?
624 standard 600 × 400 × 400 mm cartons fit, a volume utilisation of 94.3%. With heavy cartons the limit is the payload rather than the volume.
Plan your load in this vehicle.
Paste your packing list; the engine places it in the Rigid truck 9.60 (4 axles) and calculates axle loads and the loading sequence.